Pipelining Supplies and CIPP Products since 1989
Fastroc Winter
Pipe Lining Resin
Pipe Lining Resin
Fastroc Summer
Pipe Lining Resin
Pipe Lining Resin
Saferez
Pipe Lining Resin
Pipe Lining Resin
Rapidorez
Pipe Lining Resin
Pipe Lining Resin
|
A Slow react Fast set resin for those seeking safety when carrying out Point Repairs or Lining works. The resin gives an ample working time of up to 60 minutes, nearly twice as much as any other Silicate or Epoxy Point repair resin on the market. |
Fast resin ideal for Point repairs . Gives typically a generous 20 minutes working time above ground and cures near instantly below ground within minutes after that. No more Waiting for Resins to Cure (Also referred to Gadres 3050) |
| Ambient cure: Yes |
Ambient cure: Yes |
|
Range of Pot Life at 70 deg F: 50 - 70 mins |
Range of Pot Life at 70 deg F: 15- 30 mins |
| Range of Time to Hardness at 42 deg F: 80 - 120 mins | Range of Time to Hardness at 42 deg F: 40 - 80 mins |
| Range of Time to Hardness at 70 deg F: 70 - 90 mins | Range of Time to Hardness at 70 deg F: 25-35 mins |
| Range of Time to Hardness at 125 deg F: < 5 mins | Range of Time to Hardness at 125 deg F: < 10 mins |
| Supply style: Resin and accelerator premixed , hardener sold with kit | Supply style: Resin and accelerator premixed , hardener sold with kit |
| Shrinkage over 1%: No | Shrinkage over 1%: No |
| Smell: Low styrene smell | Smell: Low styrene smell |
| Supply Size: 5 gallon pails | Supply Size: 5 gallon pails |
|
Smell Free, Dual Purpose (use for Lining or add Part C and use for Point Repairs) Silicate resin. Has relatively long working Life yet cures rapidly below ground without the need for heat. May be sold with a seperately sold Part C to speed up reaction |
| Ambient cure: Yes |
|
Range of Pot Life at 70 deg F: 20 -40 mins |
| Range of Time to Hardness at 42 deg F: 2 - 3 hrs |
| Range of Time to Hardness at 70 deg F: < 2hrs |
| Range of Time to Hardness at 125 deg F: < 1hrs |
| Supply style: Resin sold with hardener. |
| Shrinkage over 1%: No |
| Smell: Low styrene smell |
| Supply Size: 7.5 gallon Kits |
|
Smell Free, Dual Purpose (use for Lining or add Part C and use for Point Repairs) Silicate resin. Has relatively long working Life yet cures rapidly below ground without the need for heat. May be sold with a seperately sold Part C to speed up reaction |
| Ambient cure: Yes |
|
Range of Pot Life at 70 deg F: 20 -40 mins |
| Range of Time to Hardness at 42 deg F: 2 - 3 hrs |
| Range of Time to Hardness at 70 deg F: < 2hrs |
| Range of Time to Hardness at 125 deg F: < 1hrs |
| Supply style: Resin sold with hardener. |
| Shrinkage over 1%: No |
| Smell: Low styrene smell |
| Supply Size: 7.5 gallon Kits |
|
A combination woven and chopped strand fiber glass matting, supplied cut to the relevant pipe diameter width. Saves on wastage and time. The material is used for either No Dig Short Lining, or Trenchless Point lining of defective sections of pipe. |
A woven fiber glass tube used for Trenchless Spot Repairs of Old defective sewer pipes. The material is used as an alternative to flat sheets of fiberglass used for Sectional Point Repairs. It may also be used for No Dig Lining of 2 inch diameter pipes using a long length packer. |
|
SupplySize Availability: 150m (160 feet) |
SupplySize Availability: 50m (160 feet) Rolls |
| Ease of Impregnation: High | Ease of Impregnation: High |
| Weight of Glass: 900 grm / m2 | Weight of Glass: 700 - 900 grm / m2 |
| Type of Glass: Chopped Strand / Woven Roven | Type of Glass: Braided Woven Fibreglass tube |
| Pipe Diameter Range: 2 - 18" (50mm - 300mm | Pipe Diameter Range: 2 - 9" (50mm - 300mm) |
| Smell: Low styrene smell | Smell: Low styrene smell |
| Bends Ability: High | Bends Ability: Low |
| Supply Size: 5 gallon pails | Supply Size: 5 gallon pails |
Sheetex Glass
Sectional Glass Liner
Sectional Glass Liner
Easy Cast Tube
Sectional Glass Liner
Sectional Glass Liner
USA FACTORY CALL +1 866 535 3694
UK FACTORY CALL + 44 207 277 8878
Pipe Lining Supplies - Point Repair Liners in Kits
Supply of Patch Kits is increasingly becoming more popular for those seeking to carry out a Sectional Lining on a broken drain pipes. Our Point Repair kits is supplied in a modular format with options on what type of pipe lining resin and what type of fiber glass reinforcement. The table below shows the choice on the type of glass and the choice on the type of resin. Whatever combination of choice made, the product is supplied in kit form with measured chemical quantities and all the ancillaries you would expect to find in traditional kits, such as gloves, polytube, ties etc.
Supply of Patch Kits is increasingly becoming more popular for those seeking to carry out a Sectional Lining on a broken drain pipes. Our Point Repair kits is supplied in a modular format with options on what type of pipe lining resin and what type of fiber glass reinforcement. The table below shows the choice on the type of glass and the choice on the type of resin. Whatever combination of choice made, the product is supplied in kit form with measured chemical quantities and all the ancillaries you would expect to find in traditional kits, such as gloves, polytube, ties etc.