Drain Pipe Lining Supplies - Bulk Point Repair Liners / Resins
Point Repairs or Sectional Liners are sold in either bulk or in kits. Applications for our products includes Drain Pipe Lining, Sewer Pipe Lining and Storm Water Pipe Lining. Below is a list of our product range for the various CIPP situations. If you need any assistance in selecting the right material for your broken drain or sewer, please call us on 1 866 535 3694 if in the USA or +44 207 277 8878 for the Rest of the World
Point Repairs or Sectional Liners are sold in either bulk or in kits. Applications for our products includes Drain Pipe Lining, Sewer Pipe Lining and Storm Water Pipe Lining. Below is a list of our product range for the various CIPP situations. If you need any assistance in selecting the right material for your broken drain or sewer, please call us on 1 866 535 3694 if in the USA or +44 207 277 8878 for the Rest of the World
Address details
Saferez
Point Repair Resin
Point Repair Resin
Slowrez
Point Repair Resin
Point Repair Resin
Sheetex Glass
Sectional Glass Liner
Sectional Glass Liner
Easy Cast Tube
Sectional Glass Liner
Sectional Glass Liner
|
A Slow react Fast set resin for those seeking safety when carrying out Point Repairs or Lining works. The resin gives an ample working time of up to 60 minutes, nearly twice as much as any other Silicate or Epoxy Point repair resin on the market. |
"Summer Resin". Give maximum working time of up to 4 hours yets cures quickly below ground with or without assistance of heat. Ideal for long shots or work in Summer. Formerly referred to as Gadres 4000 |
| Ambient cure: Yes | Ambient cure: Yes |
|
Range of Pot Life at 70 deg F: 50 - 70 mins |
Range of Pot Life at 70 deg F: 2-3 hrs |
| Range of Time to Hardness at 42 deg F: 80 - 120 mins | Range of Time to Hardness at 42 deg F: 4 - 6 hrs |
| Range of Time to Hardness at 70 deg F: 70 - 90 mins | Range of Time to Hardness at 70 deg F: 3-6 hrs |
| Range of Time to Hardness at 125 deg F: < 5 mins | Range of Time to Hardness at 125 deg F: < 1 hrs |
| Supply style: Resin and accelerator premixed , hardener sold with kit | Supply style: Resin and accelerator premixed , sold with hardener |
| Shrinkage over 1%: No | Shrinkage over 1%: Yes |
| Smell: Low styrene smell | Smell: Average styrene smell |
| Bends Ability: Average | Bends Ability: Average |
| Supply Size: 5 gallon pails | Supply Size: 200kg or 55 gallon drum |
USA FACTORY CALL +1 866 535 3694
UK FACTORY CALL + 44 207 277 8878
Pipelining Supplies and CIPP Products since 1989
|
A combination woven and chopped strand fiber glass matting, supplied cut to the relevant pipe diameter width. Saves on wastage and time. The material is used for either No Dig Short Lining, or Trenchless Point lining of defective sections of pipe. |
A woven fiber glass tube used for Trenchless Spot Repairs of Old defective sewer pipes. The material is used as an alternative to flat sheets of fiberglass used for Sectional Point Repairs. It may also be used for No Dig Lining of 2 inch diameter pipes using a long length packer. |
|
SupplySize Availability: 150m (160 feet) |
SupplySize Availability: 50m (160 feet) Rolls |
| Ease of Impregnation: High | Ease of Impregnation: High |
| Weight of Glass: 900 grm / m2 | Weight of Glass: 700 - 900 grm / m2 |
|
Type of Glass: Chopped Strand / Woven Roven |
Type of Glass: Braided Woven Fibreglass tube |
|
Pipe Diameter Range: 2 - 18" (50mm - 300mm |
Pipe Diameter Range: 2 - 9" (50mm - 300mm) |
| Bends Ability: 45 degrees | Bends Ability: 180 degrees |
