Drain Lining Supplies and Products - Resin Choices
The Drain Lining Resin products we sell fall broadly into two categories, traditional styrene polyester resin or Non VOC resins, which will include Epoxies, Slicates and more recently Styrene free Polyesters. When relining an old drain pipe the choice of resin used has direct implications on the productivity of your team. One of the advantages of the traditional styrene based products is the fact that your productivity is greatly enhanced. This is either due to the rapid Gel to Cure to the resin or the lower equipment requirements as some the resins act indirectly as a chemical heater. Below is a list of Styrene based Resins, If you have any questions on the right product selection for your Drain Repair or Relining needs, email or call us 1 - 866 535 3694
The Drain Lining Resin products we sell fall broadly into two categories, traditional styrene polyester resin or Non VOC resins, which will include Epoxies, Slicates and more recently Styrene free Polyesters. When relining an old drain pipe the choice of resin used has direct implications on the productivity of your team. One of the advantages of the traditional styrene based products is the fact that your productivity is greatly enhanced. This is either due to the rapid Gel to Cure to the resin or the lower equipment requirements as some the resins act indirectly as a chemical heater. Below is a list of Styrene based Resins, If you have any questions on the right product selection for your Drain Repair or Relining needs, email or call us 1 - 866 535 3694
Drain Lining Supplies and CIPP Products since 1989
Address details
Saferez
Drain Lining Resin
Drain Lining Resin
Slowrez
Drain Lining Resin
Drain Lining Resin
Rapidorez
Drain Lining Resin
Drain Lining Resin
Instacure
Drain Lining Resin
Drain Lining Resin
|
A Slow react Fast set resin for those seeking safety when carrying out Point Repairs or Lining works. The resin gives an ample working time of up to 60 minutes, nearly twice as much as any other Silicate or Epoxy Point repair resin on the market. |
"Summer Resin". Give maximum working time of up to 4 hours yets cures quickly below ground with or without assistance of heat. Ideal for long shots or work in Summer. Formerly referred to as Gadres 4000 |
Fast resin ideal for Point repairs . Gives typically a generous 20 minutes working time above ground and cures near instantly below ground within minutes after that. No more Waiting for Resins to Cure (Also referred to Gadres 3050) |
Near Instant Cure Resin but yet unbelievably gives give working time of up to 120 mins !!!" How ?. The resin is very stable at temperatures under 10 deg. C (48 deg F). Once temperature rises above 35 deg C (90 deg F)...Bang you get a near instant reaction. No need for recirculating water and all that aggravation. Just fill liner up with water at 110 deg F. By the time you filled the line up you are done !!! |
| Ambient cure: Yes | Ambient cure: Yes | Ambient cure: Yes | Ambient cure: Yes |
| Range of Pot Life at 70 deg F: 50 - 70 mins | Range of Pot Life at 70 deg F: 2-3 hrs | Range of Pot Life at 70 deg F: 15- 30 mins | Range of Pot Life at 70 deg F: 90 - 120 mins |
| Range of Time to Hardness at 42 deg F: 80 - 120 mins | Range of Time to Hardness at 42 deg F: 4 - 6 hrs | Range of Time to Hardness at 42 deg F: 40 - 80 mins | Range of Time to Hardness at 42 deg F: 150 - 240 mins |
| Range of Time to Hardness at 70 deg F: 70 - 90 mins | Range of Time to Hardness at 70 deg F: 3-6 hrs | Range of Time to Hardness at 70 deg F: 25-35 mins | Range of Time to Hardness at 70 deg F: 100 - 150 mins |
| Range of Time to Hardness at 125 deg F: < 5 mins | Range of Time to Hardness at 125 deg F: < 1 hrs | Range of Time to Hardness at 125 deg F: < 10 mins | Range of Time to Hardness at 125 deg F: < 20 mins |
| Supply style: Resin and accelerator premixed , hardener sold with kit | Supply style: Resin and accelerator premixed , sold with hardener | Supply style: Resin and accelerator premixed , hardener sold with kit | Supply style: Resin and accelerator premixed , hardener sold with kit |
| Shrinkage over 1%: No | Shrinkage over 1%: Yes | Shrinkage over 1%: No | Shrinkage over 1%: No |
| Smell: Low styrene smell | Smell: Average styrene smell | Smell: Low styrene smell | Smell: Low styrene smell |
| Supply Size: 5 gallon pails | Supply Size: 200kg or 55 gallon drum | Supply Size: 5 gallon pails | Supply Size: 5 gallon pails |
| ....Click Here to Download Pipelining Data | |||
USA FACTORY CALL +1 866 535 3694
UK FACTORY CALL + 44 207 277 8878
